Tapatalk

Wisper Node Lora - Does it support the AS923 (“AS2”) frequency band ?

Wisper Node Lora - Does it support the AS923 (“AS2”) frequency band ?

2

PostAug 20, 2019#1

Hello.

I am very interested in your products.

Does you Wisper Node Lora support the LoRaWAN frequency band for Hong Kong  ( AS923 )

Thank you.

   Miguel.

1885
1885

PostAug 20, 2019#2

Hello,

The Whisper Node does not come with LoRaWAN firmware. You would need to download the firmware layer and install. Look for LMIC or similar libraries for Arduino + RF 95.

In terms of hardware yes, it does support all LoRaWAN frequently bands.

Regards

2

PostAug 20, 2019#3

Got it.

So hardware-wise there is no limitation within the Whisper Node, i.e., the hardware is generic, not specific for each frequency.

Therefore, it is just a matter of installing the right firmware for the RF module plus possibly sending the right initialisation/configuration software commands, right ?

If so, do you have a distributor/reseller in Hong Kong, or do I have to order directly from you at Australia ?

Thanks.

   Miguel.

1885
1885

PostAug 20, 2019#4

That's correct,

Each board will work about 30MHz + and - from the specified hardware frequency version. Have a look on the The Things Network forum for the software side.for LoRaWAN. Our example firmware is based on raw LoRa only.

Wisen is the exclusive seller for the Whisper Node.

Cheers